Mid-States Steel Corp. - Employee Owned

Facility
Mid-States Steel is located in Boone, Iowa on the east side of the Industrial Park. The office and detailing departments are located in a two-story building providing 4,320 square feet adjoining the production facility, which covers more than 72,000 square feet. The production facility contains ten overhead cranes with 1,200' of crane runway. The receiving yard provides another 340' of crane runway with rail access and two additional cranes.

CNC Machines
Peddinghaus CNC Drill Line with 54" Saw
Peddinghaus CNC Hydraulic Duplicator
Peddinghaus CNC Beam Line Punch
Peddinghaus CNC Anglemaster

In-Process Material Handling:
Powered line conveyors and cross transfer conveyors

Beam Splitter
IF YOU USE TEES SPLIT FROM BEAMS WE CAN PROVIDE THEM
Capable of splitting Standard or WF Beams up to 30".

Structural & General Fabrication Equipment & Capabilites

Press Brake
Cincinnati Mechanical, 3/4 x 16', 400-ton mid-stroke, 600-ton bottom

Shears
Cincinnati Hydraulic, Capacity 5/8" x 12'

Burning
Multiple head oxygen/propane with 8' wide x 80' long burn table.
Plasma torch, for stainless steel cutting and light gauge material.

Welding
We have various stations equipped to handle Mig, Sub-arc, Flux core, and Stick Welding.
Including stud welding capabilities and certified welding personnel.

Surface Preparation
Shot blasting, two machines, (#1) pass through plate machine, handles material up to 72" high in one pass, (#2) pass through powered conveyer, handles material up to 40" high.

Painting/Coatings
Prime coat spray, alkyd enamels, and some zinc and epoxy paints shop applied. Galvanizing and special finished applied by affiliated sources.

Sawing
Peddinghaus 54" Cold Saw, Tolerance +0, -1/16", Milled quality cut.
Will handle structural sections up to 40" high x 17 7/8 wide

Behringer Saw, Capacity: [Rectangle, 43.3" x 19.6"] [Round, 20.8"]
DoAll, Vertical Bandsaw, Capacity 23 3/4" wide x 24" high
Wells Horizontal Bandsaw, Model B-25, Capacity 36" wide x 25" high

Trucking
Delivery available on our truck with a fleet of ten trailers.

Miscellaneous Equipment
Shear, Mechanical 1/4" x 10'
Radial Arm Drill
Miscellaneous straightening equipment
Forklift capacity to 40,000 pounds
Mobile P&H 10-Ton Crane


Untitled Page	Mid-States Steel Capabilites Facility Mid-States Steel is located in Boone, Iowa on the east side of the Industrial Park. The office and detailing departments are located in a two-story building providing 4,320 square feet adjoining the production facility, which covers more than 72,000 square feet. The production facility contains ten overhead cranes with 1,200' of crane runway. The receiving yard provides another 340' of crane runway with rail access and two additional cranes. CNC Machines Peddinghaus CNC Drill Line with 54" Saw Peddinghaus CNC Hydraulic Duplicator Peddinghaus CNC Beam Line Punch Peddinghaus CNC Anglemaster In-Process Material Handling: Powered line conveyors and cross transfer conveyors Beam Splitter IF YOU USE TEES SPLIT FROM BEAMS WE CAN PROVIDE THEM Capable of splitting Standard or WF Beams up to 30". Structural & General Fabrication Equipment & Capabilites Press Brake Cincinnati Mechanical, 3/4 x 16', 400-ton mid-stroke, 600-ton bottom Shears Cincinnati Hydraulic, Capacity 5/8" x 12' Burning Multiple head oxygen/propane with 8' wide x 80' long burn table. Plasma torch, for stainless steel cutting and light gauge material. Welding We have various stations equipped to handle Mig, Sub-arc, Flux core, and Stick Welding. Including stud welding capabilities and certified welding personnel. Surface Preparation Shot blasting, two machines, (#1) pass through plate machine, handles material up to 72" high in one pass, (#2) pass through powered conveyer, handles material up to 40" high. Painting/Coatings Prime coat spray, alkyd enamels, and some zinc and epoxy paints shop applied. Galvanizing and special finished applied by affiliated sources. Sawing Peddinghaus 54" Cold Saw, Tolerance +0, -1/16", Milled quality cut. Will handle structural sections up to 40" high x 17 7/8 wide Behringer Saw, Capacity: [Rectangle, 43.3" x 19.6"] [Round, 20.8"] DoAll, Vertical Bandsaw, Capacity 23 3/4" wide x 24" high Wells Horizontal Bandsaw, Model B-25, Capacity 36" wide x 25" high Trucking Delivery available on our truck with a fleet of ten trailers. Miscellaneous Equipment Shear, Mechanical 1/4" x 10' Radial Arm Drill Miscellaneous straightening equipment Forklift capacity to 40,000 pounds Mobile P&H 10-Ton Crane Untitled Page About Us\| Capabilites \| Project Experience \| Employee Ownership \| Contact Us \| Directions \| Home